3. 3mm tip
4. Container
5. USB-C cable
6. Storage bag
7. Instructions
04. INSTALLATION
1. Place the removable container on top of the aspirator base and press down
well so that the container fits well on the aspirator base.
2. Select the appropriate silicone tip and place it on the container.
05. BATTERY INDICATOR
1. When the device is switched on, the power/mode change button lights up to
indicate the current battery status:
• Green light - battery status 31%-100%.
• Orange light 11%-30%.
• Red light 4%-10
• Flashing red light 1% - 3%
2. In standby mode, the unit switches off after 1 minute.
3. Warning: The battery cannot be charged continuously, as this could easily
damage it. Unplug the device as soon as the battery is fully charged.
4. During charging, the light indicates the status:
• Red light - battery charging, current status 0-30%.
• Green flashing light - battery charging, current status 31-99%.
• Green light - battery charged, disconnect from power supply
06. SILICONE TIPS
1. 2mm tip- designed for children from birth to 2 years of age
2. 3mm tip - for children from 2 to 6 years of age
07. INSTRUCTIONS FOR USE
1. Assemble the device according to the instructions in the "installation"
section. Make sure the container and silicone tip are correctly fitted to the
aspirator.
2. Press and hold the power/mode change button to switch the device on,
then press it again to change the suction level until the preferred mode is
selected:
• Gentle mode- illuminated 1 power mode indicator light
• Medium mode- 2 power mode indicator lights illuminated
• Strong mode- 3 power mode indicator LEDs illuminated
3. Before using the aspirator on your baby, test the strength of the device on
10