Publicidad
Idiomas disponibles
Idiomas disponibles
4 Assembling Your S-Max
Install the steering bar
2
1
Insert the steering bar into the
S-Max body.
Adjust the knee pad height
2 2
1
Rotate the height adjustment knob
counter-clockwise.
24
Tighten the two screws.
3
Put the cap on.
(See Accessories No. 3)
Lift the knee pads to the desired
*
Lift the guide bar to help steer the
height. Rotate the height
S-Max without a rider when
adjustment knob clockwise to
powered on.
tighten.
Warning:
DO NOT use to guide bar lift or carry
the S-Max.
Tire Replacement
* Tires are subject to wear and need to be purchased separately.
Remove the six screws from the tire.
1
Replace the rear tire or comfortable tire, cover the hubcaps, and tighten the six screws.
3
* The steps above are only applicable to the replacement of rear tires.
The comfortable tire is only for S-Max.
Remove the hubcaps and then remove the
2
outer tire.
The side with printing should face outwards.
25
Publicidad
