Publicidad
Idiomas disponibles
Idiomas disponibles
4 Installation of Accessories
Install the Rear spoiler
Note: Do not press or lift the rear spoiler during installation.
a
Insert the tail bracket into the tail jack.
a
L
Install the Ninebot Engine Speaker
a
Place the base in a proper position (as shown below)
and wrap the strap around the vehicle body and fasten
the strap. Press the remaining part of the strap into the
storage slot.
a
10
b
Use the 2.5 mm hex wrench to tighten the 6 screws
into the main body of the rear spoiler
Accessory No. 2).
b
R
b
Align the holes on the bottom of the speaker.
Press down until you hear a "clicking" sound.
b
Remove the Speaker
Press the disassembly switch while lifting the speaker upward.
(See
* For more information about the speaker, see the user manual of Ninebot Engine Speaker.
Disassembly and Replacement of Tires
* Only applicable to Gokart front tire.
1
Use a 3/4"(19 mm) wrench to remove
the middle screw.
2
Replace the tire.
3
Tighten the screw.
The cross head of the screw should face outwards.
11
Publicidad
