Publicidad
Idiomas disponibles
Idiomas disponibles
6. Setting the time
1.
Press and hold the "SET" button for 3 seconds, the display screen shows
"24H" and starts flashing. Press "UP" or "DOWN" to select "12H" or "24H".
2.
Press "SET"again and the hour digits start flashing. Press "UP" or "DOWN"
to set the hour (you can adjust it faster by pressing and holding).
3.
Press "SET" again and the minute digits start flashing. Press "UP" or
"DOWN" to set the minute (you can adjust it faster by pressing and hold-
ing).
4.
Press "SET". The current setting mode is exited automatically after 10
seconds if you do not press the button.
Note: If you have selected the 12-hour display, the "PM" LED is displayed at the
corresponding times. Press and hold the "UP" button for 3 seconds to change
between "12H" and "24H" format.
7. Setting the alarm
1.
Press the "DOWN" button once briefly to switch the alarm on / off. The
sequence is as follows: Alarm 1 On - Alarm 2 On - Alarm 1 Off - Alarm 2 Off
(circulation).
2.
Press the "AL" button once briefly to select the alarm, the alarm icon
(18/19) is shown at the bottom of the display. The sequence is as follows:
Alarm 1 - Alarm 2, the alarm icon starts flashing.
3.
After selecting the alarm (the relevant alarm icon starts flashing), press
and hold the "AL" button for 3 seconds to enter the setting. The sequence
is "Hours" - "Minutes" - "Snooze time" - "Alarm mode". The option to be
adjusted starts flashing in the display.
4.
Adjust the value using the "UP" or "DOWN" buttons. Press the "AL" button
once to confirm after the adjustment.
5.
The default snooze time is 5 minutes. The "05" icon starts flashing (indi-
cates 5 minutes), press the "UP" or "DOWN" buttons to adjust the snooze
time from 5 to 60 minutes. Confirm using the "AL" button.
English
19
Publicidad
