Publicidad
Idiomas disponibles
Idiomas disponibles
1.
INTRODUCTION
Please read this user manual before running the device and comply with safety requirements
stated below. We highly recommend you to perform periodical maintenance and cleaning
precautions ; safe and efficient usage is only possible through these.
Please keep this user manual at a location, which is close to device and always accessible.
Please read and comply with all safety warnings!
Safety warnings will enable you to use the device with ease and help to prevent
misunderstandings and tangible or intangible damages.
2.
SAFETY INSTRUCTIONS
This device is manufactured in accordance with current technical standards and well accepted
technical safety rules.
Thus, we kindly request the following safety instructions are observed in an absolute manner:
1. Use the polishing machine when it is in a perfect technical condition and in compliance with the
rules, ensure its safety and be aware of potential dangers and according to instruction manual!
You shall have no right to claim warranty in case of misuse or deficient maintenance.
2.
Before running the device, check the information stated on type license at the rear side of the
device. Device is compatible for 230V connection and shall only be connected that type of mains
input.
3.
In case of failures, which may have adverse effects on safety, please immediately request the
failure to be repaired by manufacturer; otherwise, all warranty and liability insurances will be lost.
4. This device is suitable for grinding, milling, scratching and polishing processes only with
permitted tools. Any other use deemed to be unsuitable. Manufacturer shall not be liable for
losses arising from such use. User shall be fully responsible for this risk.
5. Store the user manual meticulously and close to device at all times.
6. In addition to user manual, pay attention to legal provisions with general validity and other
binding regulations related to accident prevention and environment protection.
7. Personnel assigned to work with the device are required to carefully read user manual and in
particular, safety instructions before using. This rule is especially prevalent for personnel, which
will occasionally work with the device.
8. Do not carry jewellery, necktie or pendant clothes. Pendant cloth pieces may be snatched by
rotary parts and cause serious injuries. In case of having long hair, wear a suitable hood.
9. Protect connection cables from heat and sharp edges and install them in such a way that they
will not get damaged. Unplug the device when it is not used, during tool change or repair. While
unplugging, pull from plug and do not pull the cable itself. Make sure that all connections are
perfect when using cable extensions and check electrical load and capacity before use.
Polishing machine POLYTEC by PRECITEC® / MSA23.005 / User manual / All rights reserved
3
Publicidad
