Health O Meter Professional 349KLX Manual Del Usuario página 123

OPERATING INSTRUCTIONS (CONT)
Auto-Off Function
As an energy saving feature, the scale automatically powers off after 2 minutes of inactivity.
This function is enabled by default.
Disable Auto-Off
1. While the scale is powered off, press and hold the lb./kg button.
2. While holding the lb./kg button, press the ON button to power the scale on.
3. "349" will briefly appear on the display followed by "A-OF" and then "0.0" lb appears.
4. Release the lb./kg and ON button.
5. Auto-off is now disabled, and the scale will remain on until the scale is manually powered
off.
Enable Auto-Off
1. While the scale is powered off, press and hold the lb./kg button.
2. While holding the lb./kg button, press the ON button to power the scale on.
3. "349" will briefly appear on the display, followed by "0.0" lb.
4. Release the lb./kg and ON button.
5. Auto-off is now enabled.
Changing the Weight Measuring Unit
1. Press the ON button to power the scale on.
2. Wait for "0.0" LB or "0.0" KG to appear on the display.
3. Press the lb./kg button to toggle to the desired weight measuring unit.
Locking the Weight Measuring Unit
Note:
The weight measuring unit can be locked to only measure in KG or LB.
1. Press the ON button to power the scale on.
2. Wait for "0.0" LB or "0.0" KG to appear on the display.
3. Press and hold the lb./kg button until the unit of measure begins to flash and the selected
mode will be locked.
4. Release the lb./kg button and the scale will operate in the selected mode.
5. Repeat steps 3-4 to change the weighing mode to a different unit of measure as the default
for use.
Connection to Welch Allyn® Spot Vital Signs® Lxi Monitor.
Warning: When connecting to another medical device, the power adapter must not be
used. Disconnect the power adapter from the scale and use only the battery power. This
ensures proper electrical isolation.
UM349KLX REV20171212
123
Back to Home Page