DELTA DORE TYDOM 2.0 Manual De Utilización página 17

2. Personalising TYDOM 2.0
2.1 Personalising the transmitter with a user code
• From the touch screen keypad
Use the touch screen keypad interface to configure your transmitter
even more easily.
The table opposite shows the functions that can be personalised on TYDOM 2.0
from the CLT 8000 TYXAL+ touch screen keypad.
(Menu: Installation > Products > Configure).
• Without touch screen keypad
Set the alarm control unit to maintenance mode (see system guide)
Call the transmitter and let the speech synthesis system guide you.
2.2 Naming TYDOM 2.0
This menu is used to select a specific name for the transmitter.
Ê Enter the installer code (default 6-digit code can be found on a label on the back of the control
unit) and confirm with OK.
Ë Press Settings, then select the menu:
Installation > Products > Configure
25/11/15 12:48 Access code 25/11/15
OFF
XXXXXX
Enter your code
SOS Settings Ok Info
SOS
Ì Press the button of the product
or select it from the list of products
by clicking on 'Browse' (see table below)
Í Once the product is identified, select the
'Name' menu.
Î You can choose a name from the list
(recommended), then a number (optional)
or personalise (Ï) the product name
by entering a new name.
Ï Confirm with OK.
We recommend you use one of the labels proposed in the list.
In this way, the pre-recorded name will be announced in the event of an alert.
12:48 Settings Installation
Installation Products
OFF
Clock
Zones
Languages
Door chime
My house
Settings Back Ok
Back
Products Configure
Add
Press the button off the
Configure
product
Activate/deactivate
Back Ok Back
or Browse
Configure
CLT 0 54 22
TY2 0 03 01
DMB 0 AD AD
Back
Ok TY2 0 03 01 Name
Name Child's bedrm
Tamper alarm Master bedrm
Entrance timer Bedroom
Back Ok Back
OR
Back
Name
Personalise
Reception
Alley
Back
Y a n n
Back
32
2.3 Call numbers
This menu is used to programme the numbers that will be called if there is an alarm,
technical defect or to send video links.
Ê Enter the installer code (default 6-digit code can be found on a label on the back of the control unit)
and confirm with OK.
Ë Press Settings, then select the menu:
Installation > Products > Configure
25/11/15 12:48
OFF
Enter your code
SOS Settings
Ì Press the button of the transmitter
or select it from the list of products
by clicking on 'Browse'.
Í Select the 'Call numbers' menu.
Î Select the call number to programme
(telephone no. 1 to 6), then press 'OK' to confirm.
Enter the call number required.
Confirm with OK.
Choose the distribution option, that is the way in which
you want to be alerted in the event of intrusion:
voice or SMS. Confirm with OK.
A programmed number with SMS distribution option
will automatically receive the video link in case of intrusion.
Ok (upon detection of a DMBV TYXAL+ )
Programming a call from abroad to France:
You are living in a country bordering on France, and want to programme
the number 01 23 45 67 89 located in France, dial: 00 33 1 23 45 67 89.
Browse
If necessary, you can insert a pause in the dialling (maximum 16 digits) by
entering #.
Ok
2.4 Configuring the SIM card
This menu is used to enter the PIN code of the SIM card to activate it.
Ê Enter the installer code (default 6-digit code can be found on a label on the back of
Number
Ok
the control unit) and confirm with OK.
0 0
Ë Press Settings, then select the menu:
Ok
Installation > Products > Configure
Ì Press the button of the transmitter or select it from the
list of products by clicking on 'Browse'.
Name
Í Select the 'SIM card' menu.
b e d r o o m
Ok Î Enter the parameters of the SIM card:
PIN code
PUK code (if the SIM card is blocked)
Access code 25/11/15 12:48
Installation
OFF
XXXXXX Clock
Languages
My home
SOS Ok Info Settings Back
Add
Configure
Activate/deactivate
Back
Nommer Name
Tamper alarm Auto protection
Numéros d'appel Call numbers
Back Retour
Télésurveillance Remote monitoring
Appels entrants Incoming calls
Aide vocale Auto attendant
Supervision centrale Alarm control unit monitoring
Remote monitoring
SMS alert numbers
SIM card
Back
Auto attendant
Alarm control unit monitoring
33
EN
Settings Installation
Produits
Zones
Door chime
Ok Back Ok
Products Configure
Press the button of the
product
Ok Back Browse
or Browse
Configure
CLT 0 54 22
CS 0 54 89
TY2 0 03 01
Retour Ok
TY2 0 03 01 TY2 0 03 01 Call numbers Numéros d'appel
N° tél 1 Tel. no. 1
Tel. no. 2 N° tél 2
N° tél 3 Tel. no. 3
N° tél 1 Tel. no. 1
Ok
Ok Back Retour Ok Ok
0 0
Retour Back Ok Ok
Distribution option
Tel. no. 1
Voice
Distribution option
Back Ok
Tel. no. 1
SMS
Back Ok
TY2 0 03 01 SIM card
Enter PIN code
Enter PUK code
Enter PIN code
Ok Back
Ok
0
Enter PUK code
Back Ok
0
Back Ok