Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustments
Cutting Height
There is a cutting height adjustment lever located above the rear left wheel.
1.
Pull the height adjustment lever outward towards wheel (unit will tend to
fall when lever is moved outward). See Figure 10.
2.
Move lever to desired position for a change in cutting height. See Figure 10.
3.
Release lever towards deck.
Handle Pitch
For convenience of operation, you may adjust the pitch of the handle as follows:
1.
Remove star knobs and carriage bolts from handle. See Figure 11.
2.
Position the handle in one of the three positions that is most comfortable.
See Figure 11 inset.
3.
Secure into position with star knobs and carriage bolts removed earlier.
ASSEMBLY
11
2
Lower
Higher
3
1
Figure 10
Figure 11
Publicidad
