Installation
1.
Drill four holes on the ceiling with the correct spacing A and B. Use a drill with
the right diameter so that the panel does not fall down.
Panel size (mm)
660 * 635 (or similar)
1085 * 635 (or similar)
1285 * 635 (or similar)
2.
Fasten the two wall units to the ceiling with screws and tighten the screws.
This is very important.
Must be screwed down to the end.
Ceiling suspension
Hole spacing of the screws (mm)
A500*B100 mm
A500*B300 mm
A500*B300 mm
Ceiling
EN
37