Operation:
The system's utilization is shown step-by-step on the following figures.
1 - A f t e r p r o p e r e l e t r i c a l
installation, place the "on-off"
switch at the "on" position.
Operation sequence
When the visitor
presses the Video
Doorphone button ...
If the electrical locker is installed, actuate the
corresponding button at the monitor front
panel for allowing the visitor to come in. The
locker will be actuated only if the handset is
out of the hanger.
"Important note:
"This equipment should only be opened by expert technicians in order to prevent
an electrical shock hazard. In the case of decay of the power cable, it should be
replaced by an authorized distributor or HDL technical service".
Ring sound
Brightness setting
volume
(Only B and W)
2 - Coloque os ajustes de brilho
(somente P&B) e volume da
campainha nas posições centrais.
... you will hear the
call ring and will
automatically
visualize him through
the monitor.
To speak with the
visitor, just pick-up
the handset.
For actuating the outdoor camera and
visualizing the image without communicating
with the outdoor doorphone, press the monitor-
actuating button. When hanging up the
handset or approximately 2 minutes and 30
seconds after actuating the monitor, the
monitor will turn off automatically.
14