Descargar Imprimir esta página

Craftsman 917.387370 Manual Del Usuario página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGINE
ENGINE
SPEED
Your engine speed has been factory set.
Do not attempt to increase engine speed
or it may result in personal injury.
If you
believe that engine is running too fast or
too slow, take your mower to a Sears or
other qualified service center for repair
and adjustment.
CARBURETOR
Your carburetor
is not adjustable.
If your
engine does not operate properly due to sus-
pected carburetor problems,
take your lawn
mower to a Sears or other qualified
service
center for repair and/or adjustment.
IMPORTANT:
Never tamper with the
engine governor,
which is factory set
for proper engine speed.
Overspeeding
the engine above the factory high speed
setting
can be dangerous.
If you think
the engine-governed
high speed needs
adjusting,
contact a Sears or other
qualified
service
center, which has proper
equipment
and experience
to make any
necessary
adjustments.
Immediately
prepare your lawn mower for
storage at the end of the season or if the
unit will not be used for 30 days or more.
LAWN
MOWER
When lawn mower is to be stored for a
period of time, clean it thoroughly, remove
all dirt, grease, leaves, etc. Store in a
clean, dry area.
1. Clean entire lawn mower (See
"CLEANING"
in the Maintenance
sec-
tion of this manual).
2. Lubricate as shown in the Maintenance
section of this manual.
3. Be sure that all nuts, bolts, screws, and
pins are securely fastened.
Inspect
moving parts for damage,
breakage
and wear. Replace
if necessary.
4. Touch up all rusted or chipped paint
surfaces;
sand lightly before painting.
HANDLE
You can fold your lawn mower handle for
storage.
NOTE: The upper handle has an "anti-
fold" bracket
located on the left side of the
handle. This bracket prevents the upper
handle from folding forward, which helps
protect control cable(s) from damage.
1. Squeeze
the bottom ends of the lower
handle toward each other until the
lower handle clears the handle bracket,
then move handle
forward.
2.
Loosen upper handle mounting bolts
enough to allow upper handle to be
folded back.
IMPORTANT:
When folding the handle for
storage or transportation,
be sure to fold
the handle as shown or you may damage
the control cables.
• When setting up your handle from the
storage position, the lower handle will
automatically
lock into the mowing posi-
tion.
SQUEEZE
TO FOLD
Operator presence
control bar
Lower
FOLD
BACKWARD
bracket
ENGINE
FUEL SYSTEM
IMPORTANT:
It is important to prevent
gum deposits from forming
in essential
fuel system parts such as carburetor, fuel
filter, fuel hose, or tank during storage.
Also, alcohol blended fuels (called gasohol
or using ethanol or methanol) can attract
moisture which leads to separation and
formation
of acids during storage. Acidic
gas can damage the fuel system of an
engine while in storage.
14

Publicidad

loading