Linsar SM-600-A Manual Original página 62

NOTE!
WARNING!
Faulty electric installation or excess mains voltage can cause an
electric shock.
- Only connect the power cable if the mains voltage of the socket
matches the information shown on the rating plate.
- Only connect the power cable to an easily accessible socket so
that you can quickly disconnect it from the mains power in the
event of a malfunction.
- Do not use the device if there is visible damage or if the power
cable is defective.
- Do not open the device. Leave repairs to a qualified service
technician. Contact the service address indicated on the
warranty card. Liability and warranty claims are excluded if you
carry out repairs yourself, improperly connect the device to the
power supply or operate it incorrectly.
- Do not immerse the device or the power cable in water or other
liquids.
- Never touch the power cable with wet/damp hands.
- Never pull the power cable out of the socket by the cord; always
grip the plug instead.
- Never use the power cable as a carry handle.
- Do not place any objects on the power cable.
- Keep the device and the power cable away from open flames
and hot surfaces.
- Install the power cable so that no-one can trip over it.
- Do not bend the power cable and do not pass it over sharp
edges.
This signal word provides a warning about
potential material damage.
Risk of electric shock!
62