Potensic RID-916 Manual Del Usuario página 5

Battery Level
75%—100%
50%—75%
25%—50%
10%—25%
＜10%
When LED1 flashes red slowly, it
indicates that the device has extreme
low battery level and needs to be
charged as soon as possible.
When LED1 is solid red, it indicates that
the device is malfunctioning. Please
contact the after-sales service for
support.
How to Use
1. Install RID-916 that has been
successfully written with the required
information on the drone.
Installation Precautions:
· Place the module level with the logo side
facing the sky.
· When installing, do not block the drone's
GPS antenna and keep a safe distance
from the propellers.
· If the drone is a small quadcopter, try to
install the module at the center of gravity
of the drone (the focus of the
cross-connection of the four motors).
2. Long press the power button for 2s
until all the LEDs are on and release
to power on RID-916.
3. After being powered on, the device
will automatically start satellite search
with LED1 flashing green slowly.
LED1 LED2
-
-
-
-
flashing
red
slowly
LED3
on on
on on
on off
off off
off off
LED4
on
off
off
off
off
EN-3