Publicidad
Idiomas disponibles
Idiomas disponibles
English
pattern. While the radio is displaying the fast blink, it is
in paring mode.
5. Confirm pairing on your device. (Please consult
your device's instruction manual for specific pairing
instructions.)
nOTE: If pairing is not confimed within 2 minutes, the
LED will stop flashing and the radio/charger will return
to half second interval blink pattern.
6. Once pairing is successful the Bluetooth® button
turn solid and the radio/charger will emit a short tone.
The radio/charger will now play music from your device.
Bluetooth®status indicator
lED indicator
Steady blinking (half
second interval)
Rapid Blinking
Solid light
No light
Connecting a Previously Paired
Bluetooth® Audio Device
If a Bluetooth® device has been previously paired to the
radio/charger it should automatically reconnect when
radio/charger is powered on. After 4 seconds the radio/
charger will go into connecting mode. This is indicated
by the Bluetooth® button
previously paired Bluetooth® device is recognized and
connected, the LED will go solid. If connection does not
occur and you are unable to stream music please follow the
instructions for Pairing Radio/charger with a Bluetooth®
Audio Device.
Timeout Functionality (Fig. A)
To conserve battery life the radio/charger is designed to
power off automatically after an hour of inactivity. This
inactivity could be due to the device being unpaired for
an hour or in the case of the Bluetooth® connection being
broken for the same period of time. If the radio/charger
powers off due to inactivity of any kind refer to Connecting
a Previously Paired Bluetooth® Audio Device.
nOTE: Optimum Bluetooth® streaming range is roughly
30 ft (9 m) (line of sight) to the radio/charger but distances
up to 100 feet (30 m) are possible. Physical obstacles, other
wireless devices or electromagnetic devices may affect the
connection quality.
If Bluetooth® connection is lost due to exceeding time of
separation, exceeding the optimum distance, obstacles or
otherwise, reconnecting your device with the radio/charger
may be necessary.
8
status/Mode
radio/charger is unpaired or in
connecting mode.
radio/charger is in pairing
mode and discoverable by
your device.
radio/charger is connected
with a device.
radio/charger has timed out
and/or is off.
13
blinking steady. Once the
Charging a Cell Phone or Audio Device Via
USB (Fig. E)
Your audio device or mobile phone can be charged (up
to 2.1 AMPS) using the USB power port
charger. This charging is possible when unit is on, running
off of AC plug power or the battery pack.
AC Outlets (Fig. F)
13
will
The radio/charger is equipped with 2 AC outlets
(10 amp maximum) for powering additional tools
or appliances.
Fig. F
Important Radio Notes
1. Reception will vary depending on location and strength
of radio signal.
2. Running the radio while connected to certain
generators may cause background noise.
3. AM reception will most likely be clearer when powered
by a battery pack.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Never let any liquid get
inside the tool; never immerse any part of the tool into
a liquid.
Accessories
WARNING: Since accessories, other than those
offered by D
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only D
recommended accessories should be used with
this product.
16
on the radio/
WALT, have not been tested with this
e
14
14
WALT
e
Publicidad
