the battery compartment does not close securely stop
using the product and keep it away from children
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
Your Bluetooth® radio/charger is equipped with memory
capacity in order to store the time and your selected
memory channels. When the radio is in the OFF position,
this memory capacity is powered by one coin cell battery
that is included with the radio/charger.
Power/Volume Adjustment (Fig. A)
1. To turn the radio on and off, press the ON/OFF
button
.
1
2. Turn the dial
2
clockwise to increase the volume. To
decrease the volume, turn counterclockwise.
Note the volume can also be muted by pressing the
mute button
9
.
Mode Function (Fig. A)
To choose one of the mode functions (FM1, FM2, AM, AUX
or Bluetooth) push the mode button
function is found.
nOTE: Pressing the Bluetooth®button
radio into Bluetooth®mode.
Tune or Seek Function (Fig. A)
There are two tuning methods and one seek method for
finding the desired frequency.
To tune:
Press and release the right or left arrow button
until the desired frequency is found.
To seek:
Press and hold the right or left arrow button
seconds. The tuner frequency will change to the first radio
station with acceptable clarity and stop at that station.
nOTE: When the radio/charger is paired to a Bluetooth®
device the right and left arrow buttons
skip or go to previous tracks on the audio device.
To Program the Clock (Fig. A)
1. Power on the radio.
2. Press the clock button. The date and time will be
displayed, and the year will begin to blink.
3. Use the clock button to pick the parameter of time
desired and use the right and left arrows
nOTE: If you do not press a button within 5 seconds,
the clock programming feature will automatically return
to the previous setting.
until the desired
6
13
also puts the
5
. Repeat
5
for 2
5
can be used to
5
to adjust.
To Program the Radio Preset Buttons
(Fig. A)
Ten FM and five AM radio stations may be independently
set. After programming the buttons, pressing 1, 2, 3, 4 or 5
will instantly change the frequency to the preset station.
1. Turn power on.
2. Set the radio to desired station (see Tune or seek
Function).
3. Press and hold one of the desired radio preset
buttons
until the button number appears on the
8
right side of the LCD. The radio preset button is now set.
4. Repeat steps 2 and 3 to set the other radio preset buttons.
To Adjust the EQ (Fig. A)
Sound quality can be adjusted by changing the equalization
of the bass or treble of the radio.
1. Press the EQ button
10
2. Press the right arrow
setting or the left arrow
3. Once desired adjustment is achieved, leave all buttons
released for more than 3 seconds. The procedure
will exit and the equalization adjustment will
remain activated.
Playing Audio Through an External
Device (Fig. A, E)
Audio can be played through the radio/charger via a
wireless Bluetooth® connection to a compatible Bluetooth®
device or by connecting audio device or mobile phone
using a 1/8' (3.5 mm) audio cable to the audio port
located inside the device storage compartment
Fig. E
15
16
Pairing Radio/charger with a Bluetooth®
Audio Device
1. Place the radio/charger and the Bluetooth® audio source
within 3.3' (1 m) of each other.
2. Turn radio/charger on by pressing the power button
3. Press the Bluetooth® button
button to put the unit into Bluetooth® (BT) mode.
This will cause the Bluetooth®button to blink slowly.
During this time, the radio is trying to find a previously
paired device. If found the Bluetooth®button will stay lit
without any blinking.
4. If another device is to be paired, press the
Bluetooth®button and it should begin a fast blink
to select bass or treble.
button to increase the selected
5
button to decrease it.
5
4
or use the mode
13
English
15
.
1
.
7