Cooper Lighting Solutions CLS Wallstation WaveLinx Wired Manual De Instrucciones página 2

WaveLinx Wired
General Information
The CLS Wallstation provides sleek appearance combined with
complete control and flexibility. The adaptable design allows
you to choose from a range of button combinations, which
can be fitted and changed at any time. Where fitted, raise and
lower buttons compliment the usual selection buttons to allow
immediate changes to the intensity of any scene.
An optional infrared remote control allows similar functionality
from anywhere within the room via the detector built into
the front panel of the CLS Wallstation. All control signals
are transmitted to the source controller(s) using iCANnet
connections.
Supplied Parts
Front cover
Dimensions
The CLS Wallstation is intended to fit into a single gang US
style wall box with a minimum internal depth of 2 in. (51 mm).
Wall boxes available from Cooper Lighting Solutions.
3.15 in.
(80 mm)
4.84 in.
(123 mm)
Care and Maintenance
The front cover plate should only be cleaned gently with a clean, damp
cloth. Abrasive cleaners, polishes, solvent based cleaning agents, or alkali
based cleaners should not be used.
IB50316524 page 2
February 2024
Main body
Inner plate
T O
P
0.26 in. 1.73 in.
(6.5 mm) (44 mm)
3.26 in.
(83 mm)
0.65 in.
(17 mm)
Disassembling the control plate
1. On the underside of the front cover, beneath the lower
buttons, locate the small central recess. Carefully insert
a small implement (such as a pen or screwdriver) into the
recess and lever the front cover gently away from the inner
plate.
2. Unclip the front cover from the top of the inner plate.
3. Remove the two retaining screws located above and below
the buttons and lift the inner plate away from the main
body.
T O
4. Store all removed parts safe from damage.
Fixing to a wallbox
The CLS Wallstation is intended to fit into a single gang US style wall
box with a minimum internal depth of 2 in. (51 mm).
CLS Wallstation
T O
P
P
www.cooperlighting.com