Craftsman 919.167243 Manual De Instrucciones página 17

ALL MAINTENANCE AND REPAIR
OPERATIONS NOT LISTED MUST
BE PERFORMED BY TRAINED
SERVICE TECHNICIAN.
cycmes automatically when power
is on. When servicing, you may
be exposed to voltage sources,
compressed air, or moving parts.
Before serv{cing unit unplug or
disconnect eBectricam supp{y to
the air compressor, bleed tank
of pressure, and allow the a{r
compressor to cool
To Repmace or Cmean Check
Vamve
1. Release all air pressure from air
tank. See "To Drain Tank" in the
Maintenance section.
2. Set the On/Auto/Off lever to
"OFF" and unplug unit.
3. Loosen the nut on the outtet tube
and move the outlet tube to the
side.
4,
5,
Unscrew the check valve (turn
counterclockwisd) using a socket
wrench.
Make sure the valve disc moves
freely inside the check valve
and the spring holds the disc in
the upper, closed position. The
check valve may be cleaned
with a solvent, such as paint and
varnish remover
position
nothing is
visible.
mnclosed position
disc is visible.
6. Apply sealant to the check valve
threads. Reinstall the check valve
(turn clockwise).
7. Replace the outlet tube and
tighten the nut.
8. Perform the Break-in Procedure.
See "Break-in Procedure" in the
Operation section.
17-ENG A08599