GE AES05 Manual Del Propietario Y Instrucciones De Instalación página 9

Installation Instructions
@
©
PREPARE THE AIR CONDITIONER
(cont.)
Slide the free end of the accordion panel
into the side panel rails. Slide the panel
down. Be sure to leave enough space to
slip the top and bottom of the frame into
the rails on the cabinet.
NOTE: There is a right and a left accordion
panel. Be sure to use the proper panel for
each side.
[] Slide the left and right accordion panels
into the top and bottom mounting rails.
%
Top mounting rail Top ight
Top left _{
Bottom mounting rail
PREPARE THE WINDOW
Cut the window sash seal to the proper
length. Peel off the backing and attach the
seal to the underside of the window sash.
[-6-]INSTALL THE AIR CONDITIONER IN
THE WINDOW
[] Place the air conditioner on the sill with the bottom
mounting rail against its buck edge. Center it and
close the window securely behind the top mounting
rail. It should be level or slightly tilted to the outside.
Use u level; about u 1/3 bubble will be correct case
slant to the outside.
Type B screws
Extend the left and right accordion panels to teh
vertical window sashes and attach, through the holes
in the panels, with 5 Type B screws, as appropriate.
[] INSTALL SUPPORT BRACKET AND
FOAM TOP WINDOW GASKET
@
ACAUTION:
To prevent broken glass or
damage to windows, on
vinyl or other similarly
constructed windows,
attach the window locking
bracket to the window side
jamb with one Type B
screw.
Vinyl
Wood
%
re]
Cut the foam top window gasket to the window
width.
Stuff the foam
between the glass
and the window
to prevent air and
insects from getting
into the room.
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal.
9