Abask J05Pro Manual De Instrucciones página 24

powered on.
A Red dot flashing on the top left corner indicates recording
is in progress. Press the OK to stop recording or start the
recording again.
5.1.1 Locked Recording
Lock Recording saves the current video file and prevents it
from being overwritten. When the car encounters a collision,
the G-sensor detects the vibration and the camera
automatically locks the video.
To manually activate locking video, follow the instructions
below.
1.During recording press the MENU button.
2.To unlock the footage, press the MENU button again.
5.1.2 Video Recording Menu
When the camera was paused, (there was no red dot flashes
in the upper LEFT corner), and press Menu to enter the
video recording menu settings.
Resolution: Adjust recording video resolution. UHD
P25+FHD P25: Front 4K 25FPS + Inside 1080P
25FPS(default).
QHD P30+FHD P30: Front 2K 30FPS + Inside 1080P
30FPS.
FHD P30+FHD P30: Front 1080P 30FPS + Inside 1080P
30FPS.
Loop Recording: Continuously record small video files of a
length which is determined by the settings 1/3 Minutes.
For example, if it is set for 3 minutes, the camera will
automatically save a section of videos every 3 minutes.
When the memory gets full, the dash cam will automatically
delete the oldest video to record the latest video, which can
avoid a lack of memory.
WDR:The WDR setting increases the dynamic range of the
16