Abask J05Pro Manual De Instrucciones página 26

To set Park Monitor Mode,follow the instructions below.
1.Ensure that the dash cam is not recording.The default
setting of Parking Monitor is "off".
2.Press the[MENU]Button to enter the Video Menu.
3.Press the [◀ ] or [▶ ] button to select the
Parking Mode setting option, select [OK] to confirm .
4.To use this function when the car is parked,please buy a
hard-wire kit for dash cam then connect to the vehicle's fuse
box power so as to supply the power to the camera.
If you have any questions, please contact the after-sales
email.
Exposure: Exposure is used to manually control the light
sensitivity settings.The default is 0.0
Record Audio:Turn ON / OFF audio recording in the video.
Default is on.
Date Stamp: Enable/Disable the date and time marks in
video files.
5.1.3 Setting System Menu
Press MENU button twice to access System Setting Menu in
any mode.
WiFi: Turn WiFi connection on or off. After the WiFi is turned
on, the WiFi name and password will be displayed on the
screen.
Date/Time: Set the time and date. Press the LEFT and
RIGHT keys to adjust the numbers, then press the [OK]
button to confirm/change, and press the [MENU] button
again to exit the time setting.
Screen Saver: Set the timing to automatically turn off the
LCD display after no operation so as to have the product
worked in very low power consumption; There are "Off,1
Minute, 3 Minutes, 5 Minutes" in this setting. For example, if
it is set "1 Minute", the screen will turn off after 1 Minute, but
18