Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TEC1
USER MANUAL/INSTALLER
REV. 03/2024
75mm
This is a dual channel transmitter that is activated only after having entered a suitable combination.
The units are designed for installation in indoor or outdoor locations. That ensures the utmost security
because the transmitted code is changed at each transmission session.
It has an average range of 20 meters.
The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering
10 transmissions per day.
v1.4
WARNINGS
• Note that automatic gate and door systems must be installed exclusively by qualified technical personnel
in full compliance with statutory legislation.
• Before starting the installation procedure check that the values given in the "Technical Specifications"
chapter are compatible with the application.
• This product has been designed to control door openers, gate openers and similar mechanisms. Any
other use of the product will be considered improper.
Audible signal
1 short beep
1 long beep
3 long beeps
5 short beeps
10 rapid beeps
INSTALLATION
Before physically installing the unit it is good practice to perform a practical test to assess their
functionality and effective range.
Consider that range may be up to 25 or 30% less when battery power is low.
POSITIONING
Apart from the distance from the receiver, the units should not be positioned in the vicinity or in contact
with metal structures, which could otherwise exert a signal shielding effect. Thanks to the enclosure
protection rating of IP 54, the digital selectors can be installed outdoors if required.
Status
Keypad tone
Auto power-off
Modification of combination confirmed
Error during combination input or combination edit operation
Battery low warning signal New batteries required
Publicidad
