Craftsman 320.48298 Manual De Instrucciones página 11

2. Press the MEASURE key to
turn on the laser beam; the
laser indicator will blink from
bottom to top (Fig. 10).
3. Position the tool to aim the
laser dot at the target to which
you want to measure°
4. Press the MEASURE key to
display the measured length in
the upper and lower rows of the
screen (Fig. 11)_
5, The width line in the "zCC; z'' icon
will start to blink.
64
,
8_
Position the toot to aim the laser
dot at the width target.
Press the MEASURE key again
to display the area in the lower
row of the screen; the width will
be displayed at the same time in
the upper row (Fig, 12).
Press the MEASURE key to make
a new measurement.
Volume measurement
I.
Press the "IZ_" key to enter
volume measurement mode,
The blinking line in "1_" icon
indicates the length to be
measured (Fig, 13),
Fig, 10
I
I
z?T7-_--_--_--_--_
Fig. 11
I
&
[ZB
6.762 ft
6.762 ft
Fig. 12
2,182 ft
14.755 ft
Fig. 13
48298 Manual_Revised_07,0225 Page 11