Descargar Imprimir esta página

Parkside PASSK 20-Li C3 Traduccion Del Manual De Instrucciones Originale página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 106
6. Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
Safety instructions specifically
for  impact screwdrivers
Wear hearing protection when impact
screwing. Exposure to loud noise can lead
to hearing loss.
Secure the workpiece! A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand.
Hold the power tool firmly. High torques can
occur for brief periods while tightening and
loosening screws.
Wait until the power tool has come to a stand-
still before putting it down. The tool can jam,
this leading to loss of control of the power tool.
Hold the power tool by the insulated gripping
surfaces, when performing an operation where
the screw could come into contact with hidden
wiring. Contact between the screw or attached
tool and a live wire may cause exposed metal
parts of the power tool to become live and give
the operator an electric shock.
GB │ IE
6 
Safety guidelines for battery
chargers
This appliance may be used by
children aged 8 years and
above and by persons with lim-
ited physical, sensory or mental
capabilities or lack of experience
and knowledge, provided that
they are under supervision or
have been told how to use the
appliance safely and are aware
of the potential risks. Do not
allow children to use the appli-
ance as a toy. Cleaning and user
maintenance tasks must not be
carried out by children unless
they are supervised.
The charger is suitable
for indoor use only.
ATTENTION!
This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3/
PAPS 204 A1/PAPS 208 A1.
WARNING!
To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or
a similarly qualified person.
PASSK 20-Li C3

Publicidad

loading