Publicidad
Idiomas disponibles
Idiomas disponibles
5.3 Electrical installation
E.- Plug
I.G.- General switch
M.- Motor
T.- Mass
P.F.- Fuse
6.1 Security indications
DANGER ¡ Electric damage ¡
The machine can only be plugged to one properly installed security socket. Do not remove the pins
from the plug; take it out from the cord.The cord must not touch the hot elements
. · Do not allow the cord is in contact with power supply or sharp surfaces. The cord shouldn't be out of
the table or bar. The machine must be always isolated for being in contact with other machines
ATTENTION ¡ Hot surface ¡
While the machine is working, some parts of the machine will be at high temperaturas. Do not
touch hot elements to avoid burning.
· It is forbidden to use the machine if it doesn't Work properly, it is damaged or it has been
fallen down.
· It is forbidden to use accessories or spare parts different from the ones recommended by the
manufacturer. If you use it, the user can be damaged, the warranty will be lost and the machine
can suffer breakdowns.
· It is forbidden to put the cord under carpets or any other thermo-isolating materials. Keep the cord
outside the working area and do not sink ever on the water.
· Do not move or turn over the machine while working.
DANGER ¡ Electric damage ¡
If the machine is not properly installed, it can hurt the user. Before installing it, check the local electrical
properties and compare it with the ones of the machine (check characteristics plate).
Connect the machine only if the specifications are compatible.
Follow the security indications!
The installation of the connection must have differential protection and thermic magneto, also upstream.
20
EN
T
E
6. INSTALLATION AND USE OF THE MACHINE
M
P.F
I.G
Publicidad
