Craftsman 919.165580 Manual De Instrucciones página 3

Model No. 919.165580
Max. Developed HP 5.0
Running HP 1.7
Bore 2.375"
Stroke 1.35"
Voltage-Single Phase 120V/60HZ
Minimum Branch Circuit Requirement 15 amps
Fuse Type Time Delay
Air Tank Capacity 33
Approx. Cut-In 120
Approx. Cut-out 150
SCFM @ 40 psig 7.8
SCFM @ 90 psig 5.8
E.'ff.,1 =l_lk'd _=-ll]l.]::lmll_l::[,."]m .]=l_ll#lill[o _]_: "]
This manual contains information that is important for you to know and
understand. This information relates to protecting YOUR SAFETY and
PREVENTING EQUIPMENT PROBLEMS. To help you recognize this
information, we use the symbols below. Please read the manual and pay
attention to these symbols.
_"_"_r_ Indicat es an
imminently hazardous
situation which, if not avoided, will
result in death or serious iniury.
_lndicates a
potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
_1 Indicates a
potentially hazardous
situation which, if not avoided,
result in minor or moderate inju W.
_Used without the
safety alert symbol
indicates a potentially hazardous
situation which, if not avoided, may
result in DroDertv damaae.
_Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known (to the State of California) to cause cancer, birth defects or other
reproductive harm. Some example of these chemicals are:
• lead from lead-based paints
• crystalline silica from bricks and cement and other masonry products
• arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, always wear
MSHA/NIOSH approved, properly fitting face mask or respirator when using
such tools.
When using air tools, basic safety precautions should always be followed to
reduce the risk of of personal injury.
3* ENG A00854