Descargar Imprimir esta página

Parkside PAMFW 12 D4 Traduccion Del Manual De Instrucciones Originale página 13

Herramienta multifuncional recargable
Ocultar thumbs Ver también para PAMFW 12 D4:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 105
Materials
Mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application
removal of material residues, such as carpet
glue residue on the floor.
Sanding plate
Materials
Wood and metal (sanding sheets
wood*, metal*
* depending on the sanding sheet
Application
sanding up to edges and hard to reach areas.
Fitting the sanding sheet onto
the sanding plate
Place the sanding sheet
sanding plate
.
Changing tools
NOTE
If you wish to use the dust collection, it must be
connected before fitting the tool (see section
"Connecting a dust extraction device").
WARNING! RISK OF INJURY!
Always remove the battery before working on
the power tool.
If necessary, remove an already fitted tool.
To do this, raise the tool release lever
Fit the tool (e.g. the plunge saw blade
the tool fitting.
PAMFW 12 D4
supplied),
centrally on the
.
) onto
NOTE
You can fit the tools in any snap position on
the tool fitting.
Fix the tool in place by pushing the tool release
lever
back down again.
Check that the tool is fitted firmly. Incorrectly
or insecurely fitted tools can come loose during
use and cause you an injury.
Operation
Switching on and off
Switching on
Push the ON/OFF switch
the appliance on.
The LED work light
ance is switched on to light up the working area
in low light conditions.
Switching off
Push the ON/OFF switch
switch the appliance off.
Select oscillation speed
Use the speed adjustment wheel
required oscillation speed.
Stage 1: low oscillation speed
Stage 6: high oscillation speed
NOTE
The required speed depends on the material
being worked and on the working conditions
and can be determined through practical
tests.
forwards to switch
lights up when the appli-
backwards to
to set the
GB │ IE
 9

Publicidad

loading