Publicidad
Idiomas disponibles
Idiomas disponibles
AV29A10EU_Eng.book Page 32 Tuesday, July 31, 2001 4:14 PM
ADDITIONAL PREPARATION
Devices which can output the S-VIDEO
Devices which can output the S-VIDEO
Devices which can output the S-VIDEO
Devices which can output the S-VIDEO
signal (Y/C signal) such as a S-VHS VCR
signal (Y/C signal) such as a S-VHS VCR
signal (Y/C signal) such as a S-VHS VCR
signal (Y/C signal) such as a S-VHS VCR
Connect the device to an EXT terminal other than the EXT-1
terminal.
You can choose a video input signal from the S-VIDEO signal
(Y/C signal) and regular video signal (composite signal). For
details of how to operate the device, see "S-IN (S-VIDEO in-
put)" on page 19.
T-V LINK compatible VCR
T-V LINK compatible VCR
T-V LINK compatible VCR
T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible VCR to the
EXT-2 terminal. If not, the T-V LINK function will not work
properly.
Note:
• When connecting a T-V LINK compatible VCR to the
EXT-2 terminal, be sure to connect the Decoder to the
VCR. If not, the T-V LINK function may not work properly.
After you have registered TV channels to the Programme
numbers (PR), set the DECODER (EXT-2)function for the
Programme number (PR) to ON in order to unscramble a
scrambled TV channel. For details of operation, see "Us-
ing the DECODER (EXT-2) function" on page 29.
Connecting headphones
Connecting headphones
Connecting headphones
Connecting headphones
Connect the headphones with a stereo mini-jack (of 3.5mm in
diameter) to the headphone jack at the TV front panel.
Note:
• When you connect the headphones, the TV speakers is-
sue no sound.
Video/sound signal output from the
Video/sound signal output from the
Video/sound signal output from the
Video/sound signal output from the
EXT-2 terminal
EXT-2 terminal
EXT-2 terminal
EXT-2 terminal
You can arbitrarily change over the output of the video/sound
signal from the EXT-2 terminal. It is useful when you want to
dub the video/sound from another device on the VCR con-
nected to the EXT-2 terminal. For details on how to do this op-
eration, see "DUBBING" on page 20.
TV output from the EXT-1 terminal
TV output from the EXT-1 terminal
TV output from the EXT-1 terminal
TV output from the EXT-1 terminal
The output of video/sound signal of a TV channel you are cur-
rently viewing is always output from the EXT-1 terminal.
Note:
• Changing over a Programme number (PR) also changes
over the TV output from the EXT-1 terminal.
• The video/sound signal from an EXT terminal cannot be
output.
• Teletext programmes cannot be output.
32
AV29A10EU / LCT0984-001A-U / English
Connecting Speakers/Ampli-
Connecting Speakers/Ampli-
Connecting Speakers/Ampli-
Connecting Speakers/Ampli-
I I I I
fier
fier
fier
fier
While referring to the Audio equipment connection diagram,
connect the audio equipment you desire to the TV.
You can use external front speakers to listen to the TV sound
instead of the TV speakers. For details of how to operate
them, see "Setting the SPEAKER function" on page 30.
Before connecting anything:
• Read the manuals provided with the amplifier and speak-
ers.
• Turn the TV and Amplifier off.
• To prevent magnetism from the speakers adversely ef-
fecting the TV screen, use magnetic-shielded speakers
for the front speakers.
• Note that connecting cables are not supplied.
Back of the TV
L
R
AUDIO OUT
1Amplifier
2Front speakers (Magnetic-shielded type)
Note:
• The output from the AUDIO OUT terminal is not interrupt-
ed by headphone connection to the TV. You cannot cut
the sound from the front speaker even if you connect a
headphone to the TV.
L
R
Publicidad
