Publicidad
Idiomas disponibles
Idiomas disponibles
Note: To turn off the device, never simply unplug the power cord from the wall outlet. Always
use the on/off button
This allows the device to perform a control cycle to check the operating status.
COOLING MODE
Cooling mode is ideal for hot, humid weather conditions when you want to cool and
dehumidify the room. Follow these steps to set the mode correctly:
Press the "
" key repeatedly until the "Cool" symbol appears on the display.
Use the "
" or "
90℉). Press the corresponding keys until the desired temperature is displayed.
Select the desired blower level by pressing the "
•
F2 High: This mode allows the desired temperature to be reached as quickly as
possible.
•
F1 Low: In low mode, the device runs more quietly.
The recommended room temperature during summer is usually between 24℃ and 27℃ (75℉
to 81℉). However, it is recommended not to lower the temperature much below the outdoor
temperature. Note that the difference in fan speed is more noticeable in fan mode than in
cooling mode.
FAN MODE
In fan mode, the air hose does not need to be connected. Follow these steps to set this
mode correctly:
•
Press the "
•
Select the desired fan level by pressing the "
Low.
As shown in the figure below:
ENTFEUTABLE
Dehumidify mode is ideal for reducing indoor humidity, especially during the spring
and fall seasons or in humid environments. Before using the dehumidify mode,
prepare the unit as required for the cooling mode and make sure that the exhaust
hose is connected so that the humidity can be discharged to the outside.
How to set this mode correctly:
, and then wait a few minutes before unplugging the power cord.
" keys to select the target temperature between 18℃ and 32℃ (64℉ to
" key repeatedly until the "Fan" symbol is displayed.
High
" key:
" key to choose between High and
Low
218
Publicidad
