5.
Each time the "+" key is touched, one minute will be increased.
6.
The timing shutdown adjustment range is from 1 minute to 60 minutes. If you
touch the delay setting button again, it will be set for 15 minutes, 30 minutes, 45
minutes, and 60 minutes.
7.
When you touch the delay button at 60 minutes, you will exit the timer shutdown
setting.
MAINTENANCE
GREASE FILTER
1.
To remove the grease filter, push in on the metal latch tab. This will disengage the
filter from the hood. Tilt the filter downward and remove.
2.
To install the grease filter, align rear filter tabs with slots in the hood. Push in the
metal latch tab, push filter into position and release. Make sure the filter is
securely engaged after assembly.
The grease filters should be cleaned frequently (every two months of operation, or
more frequently for heavy use). Use a warm detergent solution.
Grease filters are washable.
RECIRCULATION CHARCOAL FILTER (RECIRCULATING VERSION)
The charcoal filter is not washable, cannot be regenerated, and should be replaced
approximately every 3 months of operation, or more frequently in the case of heavy
usage.
1.
To install the charcoal filter by turning clockwise, lock it until the stop click is
heard.
24
10