geberit MAPRESS Manual Del Usuario página 59

Pressing with the Geberit pressing collar d108 mm is
performed in two stages with two different adapter jaws:
• preliminary pressing with pressing collar and adapter jaw
ZB 323 with compatibility mark
compatibility mark
• final pressing with pressing collar and adapter jaw ZB 324
with compatibility mark
mark
After correct preliminary pressing, the pressing collar can no
longer be removed from the press fitting.
1
To open the Geberit pressing collar, push in the locking pin
and at the same time, pull the pressing collar apart at the
locking lug.
2
Check that the sliding segments move as they are meant to.
Ensure that the sliding segments move freely and that the
marks on the sliding segments and the shells form a line.
36028804990855691 © 12-2023
970.496.00.0(01)
or ZB 221 with
or ZB 222 with compatibility
EN
59