VALBERG VH 4 T 007C Instrucciones De Uso página 17

B
HOW TO USE
1. Start Cooking
After power on, the buzzer beeps once, all the indicators light up for 1 second then go out,
indicating that the ceramic hob has entered the stat of standby mode.
1. Touch the ON/OFF
all the indicators show "-".
3. Select a heat setting by touching the "-" or "+" control.
• If you don't choose a heat setting within 1minute, the ceramic
hob will automatically switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time during cooking.
• By holding down either of these buttons, the value will adjust up
or down.
2. Finish Cooking
1. Turn the cooking zone off by scrolling
down to " 0 " or touching "-" and "+"
control together.
OR
Using the appliance
control.
15
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of
the pan and the surface
of the cooking zone are
clean and dry.
2. Turn the whole cooktop off by touching
the ON/OFF
EN
control.