Nexx X-COM 3 Guia Del Usuario página 38

11.2 SOFTWARE CONFIGURATION SETTING
You can change the settings of the headset through the Sena Motorcycles
App or the NEXX Device Manager.
Sena Motorcycles NEXX Device Manager
11.2.1 Headset Language
You can select or change the device language, which will stay saved even if
the headset is rebooted.
11.2.2 Audio Equalizer (Default: Off)
Increase or decrease the decibel level of different frequency ranges of audio.
• Balance will adjust all of the frequency ranges to be the same volume
level (0 dB).
• Bass Boost will increase the bass range of audio (20 Hz - 250 Hz).
• Mid Boost will increase the mid range of audio (250 Hz - 4 kHz).
• Treble Boost will increase the high range of audio (4 kHz - 20 kHz).
11.2.3 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When
you hear a ringtone for an incoming call, you can answer the phone by
saying a word such as "Hello" loudly or by blowing air into the microphone.
VOX Phone is temporarily disabled if you are connected to intercom. If
this feature is disabled, you have to tap the Center Button to answer an
incoming call.
38
X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM