Silverline 296457 Traducción Del Manual Original página 5

Wallpaper Steam Stripper Safety
WARNING: Read all safety warnings, instructions, illustrations and specifications provided
with this appliance. Failure to follow all instructions listed below may result in electric shock, fire and/
or serious injury.
WARNING: This appliance can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children shall not
play with the appliance.
• Do not handle the product with wet hands. Do not use the wallpaper stripper in wet
environments or on wet floors
• Fill the water tank, and tighten safety cap securely before connecting to power supply
• Do not tilt the product by more than 45˚. Tilting the product too far may allow boiling
water to be ejected
• Never direct steam towards people, animals, or electrical equipment
• Use in a well-lit area
• Keep the openings in the accessories clear
• Beware of hot dripping water when used overhead
• Do not use steam on cold glass as the glass may be damaged
• Allow the tools to cool down before changing them while the water tank is being used. The
Steam plates and hose will get hot during use
• Always disconnect power supply after use and before filling or carrying our user maintenance
• Allow the product to cool completely before opening tank cap
• Do not use any form of rust or calcium remover in this product
• Do not overfill the water tank
• This appliance shall not be left unattended while it is connected to the mains power supply
• Do not remove the tank cap during use, or whilst the machine is connected to the mains
• The appliance is not to be used if it has been dropped, if there are visible signs of damage or
if it is leaking
• Keep the appliance out of reach of children and pets whilst it is energised or cooling down
Product Familiarisation
1 Power Socket
2 Hose Storage Clip Mount x 2
3 Carry Handle
4 Hose Connector
5 Safety Valve
6 Tank Cap
7
Water Tank
8
Water Level Indicators
9
Hose
10 Small Steam Pad
11 Large Steam Pad
12 Hose Storage Clip x 2
13 Screws x 2
14 Scraper
Intended Use
Mains-powered steam cleaner capable of removing all types of wallpaper without the need for
harmful chemicals.
The tool must ONLY be used for its intended purpose. Any use other than those mentioned in this
manual will be considered a case of misuse. The operator, and not the manufacturer, shall be liable
for any damage or injury resulting from such cases of misuse. The manufacturer shall not be liable
for any modifications made to the tool, nor for any damage resulting from such modifications.
Not intended for commercial use.
2300W Steam Wallpaper Stripper
Unpacking Your Tool
• Carefully unpack and inspect your new tool. Familiarise yourself with all its features
and functions
• Ensure that all parts of the tool are present and in good condition.
Before Use
WARNING: Ensure the tool is disconnected from the power supply before attaching or
changing any accessories, or making any adjustments.
Assembly
• Attach the Hose Storage Clips (12) to the Hose Storage Clip Mounts (2) using the 2 x Screws (13)
• Plug the cable into the Power Socket (1) on the unit
• Attach the Hose (9) to the Water Tank (7) by gripping the Hose end and installing it to the Hose
Connector (4)
• Grip the Hose firmly and fasten it to the Steam Pad (10/11)
Note: Ensure that the Hose is securely attached to both the Water Tank and Steam Pad; otherwise it
may lead to boiling water leaking onto the work area.
Filling
Note: Do not exceed the maximum capacity of the water tank.
• Ensure that the product is unplugged and cool, and that all steam has been released
through the Steam Pad (10/11)
• Place the product on a level surface then unscrew the Tank Cap (6)
• Fill the Water Tank (7) to the required level between the maximum and minimum marks on the
Water Level Indicator (8)
• Securely fasten the Tank Cap to the Water Tank
Operation
WARNING: ALWAYS wear eye protection, adequate respiratory and hearing protection, as well
as suitable gloves, when working with this tool.
WARNING: Caution when stripping wallpaper from delicate surfaces. The high temperature
steam may cause damage to the base surface.
IMPORTANT: When in use, ALWAYS keep the water level in between the min and max line. DO NOT
overfill; DO NOT let the device run dry. If the device runs dry, it may cause damage. Monitor the
water level consistently during use.
Switching ON & OFF
• With the Water Tank (7) full and the Tank Cap (6) securely fastened, plug the power cord into
the mains outlet
• After 15 minutes, the wallpaper stripper will be ready for use
Note: Steam will be ejected from the Steam Pad (10/11) once the fluid has reached normal
operating temperature.
Wallpaper stripper tips
WARNING: When the Water Tank (7) is full, the wallpaper stripper has an approximate
operating time of 80 minutes. Do not allow the Water Tank to run dry, or run the tool for longer
than 80 minutes.
• Use a wallpaper perforator (not included) on the wall prior to steam stripper use, to help the
steam to penetrate the surface
• When the wallpaper stripper has reached normal operating temperature, hold the Steam Pad
(10/11) against the wall. Do not hold the Steam Pad against the wallpaper for longer than 10
seconds
• Use the Scraper (14) to remove the wallpaper
• When the wallpaper stripper is running low on water, disconnect from the mains and allow to
cool before opening the Tank Cap (6) and refilling
Accessories
• A range of accessories and consumables, including Wallpaper Perforator, Heavy Duty Scraper and
Wallpaper Guide Knife, is available from your Silverline stockist
• Spare parts can be obtained from toolsparesonline.com
Maintenance
WARNING: ALWAYS disconnect from the power supply before carrying out any inspection,
maintenance or cleaning.
silverlinetools.com
5