Understanding the Keypad
Legend
Less than 1 second
Turns the LCR meter on or off
Starts or stops the auto
identification mode
ESR
Holds or releases the present
Hold
Rec
reading on the display
Save
Switches between dissipation
factor (D), quality factor (Q),
DQO
and phase angle (θ)
Limit
measurement
Freq.
Selects a test frequency
DCR
Disables autoranging and sets
Range
a manual range
Auto
Switches between impedance
(Z), inductance (L), capacitance
ZLCR
(C), and resistance (R)
P
S
measurement
Enables the tolerance mode
Tol%
Sets the null/relative mode
Null
Cal
[a] Autoranging only. ESR mode exits to capacitance (C) measurement by default.
[b] Applicable for U1733C model only. DCR mode exits to inductance (L)
measurement by default.
[c] Applicable for U1732C and U1733C models only.
Keysight U1731C/U1732C/U1733C Quick Start Guide
Key response when pressed for:
-
Enables or disables the ESR
(equivalent series resistance)
mode
Starts or stops the static
recording mode
Enables or disables the limit
comparison mode
Enables or disables the DCR
(direct current resistance) mode
Enables autoranging
Toggles between parallel and
series circuit mode
Turns the backlight display on or
[c]
off
mode (if tolerance is enabled)
Enters the open/short calibration
mode for selected range and test
frequency
More than 1 second
[a]
or disables the tolerance
[b]
7