Specifications
ENGINE
21 Gross
HP Briggs
& Stratton
Model
Horsepower
Displacement
Electrical System
Oil Capacity
Engine Oil
Spark Plug Gap
Spark Plug Torque
Fuel Tank Capacity
330000 Professional Series
TM
21 Gross HP @ 3600 rpm
32.95 cu in. (540 cc)
Alternator: 9 amp Regulated,
Battery: 12V-230 CCA
48 oz (1,4 L)
Synthetic 5W30
0.030 in. (0,76 mm)
180 in-lbs (20 Nm)
Capacity: 3.5 gal (13,2 L)
CHASSIS
Seat
Seat Adjustment
Turning Radius
Front Wheels
Rear Wheels
Mesh, Suspension
9-Position
14 in. (35,6 cm)
Tire Size: 15 x 6.0
Inflation Pressure: 12-14 psi (0,82 -0,96 bar)
Tire Size: 20 x 10-8
Inflation Pressure: 10 psi (0,68 bar)
TRANSMISSION
Make
Tuff Torq® K46
Type
Foot Pedal Hydrostatic
Ground
Speed
Forward: 0-5.6 MPH (0-9,0 km/h)
Reverse: 0-3.5 MPH (0-5,6kin/h)
Drive
Belt
Brakes
Manual
MOWER DECK
Cutting Width
Base Deck Platform
Number
of Blades/Type
Frame Suspension
Deck Support
Wheels/Number
Height-of-Cut
Mower Lift
Cutting
Positions
DIMENSIONS
Overall
Length
Overall Width (with deflector)
Overall
Height
46" (116,8 cm)
Side Discharge
3, Standard Lift
Frame Hung
Standard, 4 Anti-Scalp Wheels
1.5" to 4.0" (3,8 to 10,2 cm)
Electric Height-of-Cut
Infinite
71" (180 cm)
59" (149,8 cm)
45" (114 cm)
Power Rating
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and
corrected in accordance with SAE J 1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values
are derived at 3600 RPM. Net power values are taken with exhaust and air cleaner installed whereas gross power values
are collected without these attachments. Actual gross engine power will be higher than net engine power and is affected
by, among other things, ambient operating conditions and engine-to-engine
variability. Given the wide array of products
on which engines are placed, the gas engine may not develop the rated gross power when used in a given piece of power
equipment. This difference is due to a variety of factors including, but not limited to, the variety of engine components
(air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions
(temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs &
Stratton may substitute an engine of higher rated power for this Series engine.
Parts and Accessories
See an authorized dealer.
30
www.snapper.com