Pioneer KURO PDP-S63 Manual De Instrucciones página 4

Idiomas disponibles

English

2. Fit the speaker to the brackets in the correct direction.

• Be sure not to mount the speaker upside down.

��

Caution

• To avoid any damage to the speaker and/or table top stand from striking against each other, ﬁt the speaker to the bracket while

conﬁrming their locations. As you may easily strike the stand, use the protective wrapping in which the speaker was wrapped

between the speaker and stand.

• When the speaker brackets do not ﬁt the grooves at the rear of the speaker, adjust the speaker brackets angle.

3. Tighten from back using the supplied screws (three locations).

• Tighten the three screws in order

�

��

All manuals and user guides at all-guides.com

➁

➂

as shown in the diagram.

➀

�

��

CAUTION

Do not move the flat screen TV holding on

to the brackets. This can result in injury or

damage to the flat screen TV.

The screw hole at the bottom surface of the

speaker bracket is used when the ﬂat screen

TV is installed on the wall. It is not used when

installed with the stand.

NOTE:

If after attaching the speaker its position needs

to be adjusted horizontally or vertically, first

loosen the speaker mounting screws, reposition

and then tighten the screws again at the

appropriate position.

��