Pioneer KURO PDP-S63 Manual De Instrucciones página 6

Idiomas disponibles

English

6. Fit the cables into the groove of the speaker.

7. Bundling the cables.

Follow the steps below to attach a cable clamp.

1 ) Thread the clamp band through the holder and bundle the cable(s) in the cable clamp.

2 ) Push and hold the levers then insert the hook into an appropriate hole on the rear of the ﬂat screen TV.

3 ) Pull up the clamp band to lock.

4 ) Conﬁrm that the cable clamp is seated ﬁrmly in the panel.

NOTE:

Avoid pinching or creating pressure points when routing or bundling cables.

To remove the clamp band, pull and hold the latch to release.

To remove the cable clamp, push and hold the levers then pull it out from the hole.

NOTE:

The longer a clamp is in place, the better chance of deterioration. An older clamp is more easily damaged while being removed

and may not be reusable.

��

All manuals and user guides at all-guides.com

�

��