cecotec CONGA ROCKSTAR 3000 MATTRESS Manual De Instrucciones página 18

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Dirt tank
2. On/Off button
3. Handle
4. Power cord
5. UV-light indicator
Fig. 2
6. UV light
7. UV-light protection
8. Rotary brush
9. UV-light push switches
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If any of them
are missing or not in good condition, please contact Cecotec's official Technical Support
Service immediately.
3. OPERATION
Full-cleaning mode: suction, brush rotation, and dust-mite removal
- Turn the device on. The device will operate in full-cleaning mode by default, i.e., suction,
brush rotation, and dust-mite removal (UV-C light).
- Once the device is switched on, place it on a surface to activate the UV-light push switches
34
CONGA ROCKSTAR 3000 MATTRESS
and allow the lamp to turn on. The corresponding light indicator will light up.
- Press the On/Off button to turn off the device.
WARNING
To avoid accidental damage, place the UV-C lamp on the object to be irradiated and avoid tilting
it more than 10°. Exceeding this tilt degree will make the UV-C lamp automatically switch off.
4. CLEANING AND MAINTENANCE
- It is recommended to clean the dirt tank after each use; when the dirt filter becomes
blocked by excessive dirt, clean or replace it if necessary.
- If the dirt tank fills up during operation, clean it immediately.
- When the device reaches 30 to 50 hours of operation (depending on usage), it is
recommended to change the filter to ensure proper operation.
- UV penetration is weak. Any paper, glass, or plastic can significantly reduce the intensity
of UV radiation. For this reason, any dirt or stain on the lamp tube will directly affect the
penetration of UV rays. UV lamps should be cleaned regularly to avoid impairing the
transmission and intensity of UV rays.
- Do not touch the UV lamp with your fingers, as finger smudges may affect UV-light
penetration.
- If the device is not to be used for a long period of time, store it in a cool and dry place. Do
not store it under direct sunlight or in damp places.
Cleaning the dirt tank
Turn off and unplug the device.
1.
2. Place the appliance in an upright position.
3. Turn the dirt tank clockwise and remove the dirt-tank lid.
4. Remove the filter from the dirt tank.
Clean the dirt tank.
5.
ENGLISH
35
CONGA ROCKSTAR 3000 MATTRESS