Hauck Denver Instrucciones Para El Uso página 11

INStUCtIoN FoR USE
Part List
Please check the list of parts to ensure that all parts have been delivered:
Stroller main frame with Seat unit
1 handle bar
1 canopy
1 front bar
2 rear wheels
2 sets of front wheels
1 rear wheel axle
1. UNFOLDING (fig. 1a, 1b)
Open the stroller until both side catches are engaged (1a), then install the handle onto the
stroller (1b), make sure the pushpins lock in place.
2. FRONT WHEEL ASSEMBLY (fig. 2a, 2b)
Push both front wheels into position (2a). Make sure the pushpin locks in place and cannot
be pull off. When changing the wheel, lie the stroller down in fully assembled state. Press the
release lever in between the wheel and pull the wheel out (2b).
3. FRONT WHEEL ADJUSTMENT (fig. 3)
Push the front wheel lever up to lock the swivel movement. to release the swivel movement,
push the lever down.
4. REAR WHEEL ASSEMBLY (fig. 4a-4c)
Push the wheels to the rear wheel axle until you hear a click sound (4a). Push both plastic
brackets at the same time until they are locked onto the rear legs (4b). Make sure the push pin
locks in the plastic housing securely. When changing the wheel press the button and pull the
wheel out (4c).
6. ADJUSTING THE BACK REST (fig.6)
Pull the metal handle at the back of the backrest upwards and adjust the back rest to desired
position. The back rest can be altered to 3 different positions.
7. ADJUSTING THE LEG RES (fig. 7)
Press both (left & right) buttons to bring the leg rest to the desired position.
8. INSTALL THE FRONTBAR (fig. 8a, 8b)
Install the front bar by fixing it onto the 2 sides of the catches (8a). Test the front bar by pulling
on it to make sure it is lacked into place. to open the front bar, press the buttons on both sides
and pull out the front bar (8b).
9. REVERSING THE HANDLE (fig. 9a, 9b)
Pull both plastic catches (left & right) upwards to release the handle position (9a). Press down
the 2nd safety lock (9b) and then swivel the handle to the opposite direction (9c). Please always
take care the handle hassecurely engaged in the new position. Both of the double wheels must
be additionally secured with both of the parking brakes when park the stroller, if the handle is in
the position facing towards the child.
10. BRAKING THE FRONT WHEEL (fig. 10)
The front wheels can be stopped by pressing the front wheel's brakes downward. Release the
front wheel brakes upward, it you want to move the stroller again.
11. ASSEMBLE THE CANOPY (fig. 11)
Insert the canopy plastic clamps into the housings on the 2 sides of the seat.
12. FOLDING AWAY (fig. 12a-d)
Make sure the handle is at the canopy side, and the backrest is in the upright position. Fold the
canopy backward. Press the foot lock on the left side fist (12a), then press the 2nd foot lock on
the right side (12b) to release the stroller, and push the handle forward to fold the stroller
together (12c). Close the transport lock on the side of the frame(12d).
13. SECURE THE CHILD IN THE SEAT (fig 13):
Place the child in the seat and push the clips on the waist belt into the buckle on the crotch belt
(the one that comes between the child's legs). Adjust the length of the belt to your child's needs.
Always ensure the straps are not twisted or caught on the stroller frame. Check the adjustment
every time you place the child in the seat and when the backrest is reclined. To release the
GB
11