EGO CS2000 Manual Del Usuario página 39

MAINTENANCE
WARNING:
the chain saw before servicing, cleaning, changing add-on attachments, making any
maintenance or when the product is not in use. A battery-operated chain saw with the
battery pack inserted is always on and can start accidently.
WARNING:
other parts may create a hazard or cause product damage.
WARNING:
careful of the saw chain and protect your hands from being injured by the saw chain.
WARNING:
with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes
resulting in possible serious injury.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken, or destroy plastic, which may result in serious personal injury.
WARNING:
liquids.
CLEANING
◾
After each use, clean debris from the chain and guide bar with a soft brush. Wipe
the chain saw surface with a clean cloth moistened with a mild soap solution.
◾
Remove the side cover, and then use a soft brush to remove debris from the guide
bar, saw chain, sprocket and side cover.
◾
Always clean out wood chips, saw dust, and dirt from the guide bar groove when
replacing the saw chain.
All chain saw service, other than the items listed in these maintenance instructions,
should be performed by competent chain saw service personnel.
56V LITHIUM-ION CORDLESS 20" CHAIN SAW — CS2000/CS2000-FC
To avoid serious personal injury, remove the battery pack from
When servicing, only use identical replacement parts. Use of any
Always wear heavy gloves when handling the bar and chain. Be
Always wear eye protection with side shields marked to comply
Do not at any time let brake fluids, gasoline, petroleum-based
When cleaning the chain saw, DO NOT immerse it in water or other
39