Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
2. Installing the drawer(s)
Pull the slide out as far as possible. Place the
drawer on the slide and gently push drawer to
make sure the drawer and slide lock each
other by two latches, then push and pull back
to make sure it fits perfectly.
3. Installing the backsplash
To mount the backslash (C) to the wall, apply a
thin bead of silicone compound (not included)
to the unpolished back side and bottom of the
backsplash (C). Position backsplash (C) as
shown onto vanity top (B) and against the
wall. Clean any excess silicone compound
before allowing it to dry.
2
3
C
B
6
CARE AND MAINTENANCE
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• The engineered stone surface is very sensitive to acid-alkaline liquids and materials,
such as
toothpaste, hand soap, cologne, perfume, nail polish remover, hair color and perm products,
shampoo, drain and toilet bowl cleaner, alcohol, lemon juice, medications, etc. Please try to avoid
contact of these acid-alkaline liquids and materials with the vanity top surface when possible. If
these liquids or materials spill onto the surface, wipe it off immediately. Always clean the surface
and keep it dry after use.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess
colorant promptly with a soft cloth.
7
Publicidad
