Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Description
A – Canopy
B – Body trim
C – Ceiling support
D – Body
E - Short/long suspension tube
F - Remote control receiver
G – Blades
H – Remote control
I – Lamp trim
J - LED lights
K - Remote control support
REMOTE CONTROL
1 - Speed 1/2/3/4/5/6
2 - On/off button
3 - Rotation direction change
button
4 - Timer 1/2/4/8 hours
5 - Light
6 - Airflow mode button
If your appliance does not have the
accessories described above, you
can also purchase them separately
by going to www.mellerware.com
or by contacting our customer
service team.
Installation
-
Be sure to remove all packaging
material from inside the appliance.
-
Ensure that the fan is switched off
from the supply mains before start
any installation or assembly
operation.
-
Take the motor out of the
packaging. To avoid damaging the
housing surfaces, mount the motor
on a soft surface.
In order to avoid electric shock,
-
make sure that the power supply
has been previously disconnected.
-
The electrical installation must be
done in accordance with current
regulations, connecting the fan to
ground as a precaution against
eventual electric shock.
It is recommended that the
-
installation be done by a
professional.
Install the fan at a minimum
-
distance of 2,50 meters from the
ground or other objects.
FAN INSTALLATION
-
See "FAN INSTALLATION" at the
beginning of the instructions
manual.
-
In the package, you will find the
material for fixing the bracket to
the ceiling. This material is not
suitable depending on what type
of roof. Ask a professional and use
the fixing means that you think are
the most suitable.
IMPORTANT:
Do not turn on the ceiling fan if the
blades are not in place, or the fan
will not work properly.
ASSEMBLING THE BATTERY/S
-
Caution: During the handling of
batteries, do not touch both poles
at the same time, as this will
provoke the partial discharge of
the stocked energy therefore
affecting longevity.
-
Remove the cover of the battery
compartment.
-
Check that the plastic covering
that protects the battery has been
removed (some batteries are sold
with a protective covering).
-
Put the battery in its
compartment, respecting the
polarity.
-
Replace the cover of the battery
compartment.
EN
Publicidad
