Sthor 78158 Manual Original página 10

PRODUCT OVERVIEW
The cordless stapler is used for joining fabric, leather, cardboard, paper, foil, insulation materials and other soft materials to
wood or wood-based materials with staples or nails made of metal. The stapler can also be used to join wooden or wood-based
elements. Thanks to the powerful, high-capacity battery, it is possible to use the product wherever staplers with an external power
source cannot be operated. The product is not designed for commercial use. Proper, reliable and safe operation of the product
depends on appropriate use, that is why you should:
Read this entire manual before the fi rst use of the tool and keep it for future reference.
The supplier shall not be held liable for any damage or injury resulting from improper use of the tool, failure to observe the safety
regulations and recommendations of this manual. Use of the tool for purposes other than those for which it was intended shall
cause the loss of the user's rights to a warranty and under statutory warranty.
PRODUCT ACCESSORIES
The tool is supplied complete. The battery and battery charging station are not included. Fasteners are not included.
TECHNICAL DATA
Parameter
Catalogue No.
Operating voltage
Maximum capacity
Noise level
- sound pressure L ± K
pA pA
- sound power L ± K
wA wA
Protection rating
Insulation class
Vibration level a ± K
h
Weight
Fastener type and dimensions (Fig. VII)
staples
nails
Battery type
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
The declared total vibration emission value has been measured using the standard test method and can be used to compare one
tool to another. The declared total vibration value can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is used.
Caution! Safety measures to protect the operator, which are based on an exposure assessment under actual conditions of use
(including all parts of the work cycle, such as the time when the tool is turned off or idle and the activation time), must be specifi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
O R I G I N A L
10
EN
Unit
[V DC]
[min ]
-1
[dB]
[dB]
[m/s 2 ]
[kg]
I N S T R U C T I O N S
Value
78158
20
30
89.6 ± 3.0
100.6 ± 3.0
IPX0
III
8,501 ± 1.5
2.75
Type 55: 15 - 25 mm
Type 47: 15 - 32 mm
Li-Ion