BEARWARE 305547 Manual Del Usuario página 14

6. Setting the time
Press the "TIME SET" button (2) for 3 seconds, and the hour indicator starts flash-
ing on the LCD display. Press the "UP" (3) and "DOWN" (4) buttons to configure
the hour.
Press the "TIME SET" button again,and the minute indicator starts flashing on the
LCD display.
Press the "UP" / "DOWN" buttons to configure the minute.
Press the "TIME SET" button again to exit the time.
7. Alarm setting
7.1 Setting the alarm
Press and hold the "ALARM SET" (5) button for 3 seconds to enter the setting for
Alarm 1.
Press the "UP" (3) and "DOWN" (4) buttons to set the hour for Alarm 1 and pay
attention to the "AM/PM" setting.
Press the "ALARM SET" (5) button again, and the alarm minute starts flashing.
Press the "UP" (3) and "DOWN" (4) buttons to configure the minute for Alarm 1.
Press the "ALARM SET"(5) button to enter the ringtone selection for Alarm 1.
Press the "UP" (3) and "DOWN" (4) buttons to select the ringtone for Alarm 1.
Press the "ALARM SET"(5) button to exit the ringtone setting for Alarm 1 and to
open the time setting for Alarm 2.
14
English