Publicidad
STEP 1
E E
F
1. Attach 2 keyhole hanging plates (F) to back board (3) by inserting 4 screws (E) through holes
on keyhole hanging plate (F), then tighten to back board (3).
STEP 2
A
1. Screw 2 cam bolts (A) into cam bolt holes on front rail board (5).
2. Insert 2 wood dowels (C) into wood dowel holes on front rail board (5).
3. Attach shelf (4) to front rail board (5) by inserting wood dowels (C) into wood dowel holes and
inserting cam bolts (A) into cam lock holes on front shelf (4).
4. Insert 2 cam locks (B) into cam lock holes on shelf (4), then rotate clockwise to secure cam
bolts in place.
E E
F
3
^^ Do not use the word 'pre-threaded' to describe any
holes. Call them cam bolt holes, wood dowel holes,
holes, etc.
A
5
F
3
4
C
5
C
B
F
B
Publicidad
