Publicidad
Idiomas disponibles
Idiomas disponibles
Bar and chain mounting
WARNING
• Never start the motor without
installing the guide bar first (A), the cutting chain (B) and
the bar guard (C). If these parts are not in place the user
is exposed to severe injuries.
• Set the switch in the OFF position.
D
• Pull the chain brake backwards (D) to assure it is in
F
working position (see page 8).
CAUTION
• Wear heavy-duty protective gloves to
G
manipulate the chain safely and prevent cuts.
• Remove the nuts (E) with a 1/2" combination or hex key.
• Remove the bar guard.
C
Cog
E
wheel
A
B
Displacement Direction
Straighten
• Extend the chain onto a flat and clean surface in an oval
Cutting
Advancement
shape, together with the chain bar and straighten any
sprockets
twisted link. The cutting sprockets shall face the chain
displacement direction, otherwise reverse the chain
position.
• Place the bar groove over the mounting bolts (F) on the
chainsaw.
Traction
teeth
• Place the chain links onto the sprocket. (G)
• Set the chain traction sprockets around the bar slot.
10
ENGLISH
Publicidad
