Grundig 01M-GSS1100-4320-01 Manual Del Usuario página 36

CONNECTION _______________________________
• Normally in home Wi-Fi environments, the
best results for the Internet radio will typically
be achieved when the distance between your
device and wireless access point is between
10-20 meter.
• However, the actual range will depend on the
building type, other nearby wireless network(s),
and possible interference sources.
WI-FI NETWORK-FIRST INSTALLATION ___________
Setup wizard
(installation assistant)
1. Place your Soundbar on a convenient place
within the range of Wi-Fi router to allow for a
good connection.
• Connect the main unit to the mains socket.
When you connect the device to the mains for
the first time or after a factory reset, the display
will show the "GRUNDIG" logo briefly.
• And then, the »Setup Wizard« installation
assistant appears which guides you through the
installation step by step. Follow the steps on the
screen to complete the installation:
2. Use the navigation controls [ , , , ] and [
] to start and complete the setup wizard.
• YES is highlighted by default on the screen. Just
short press the [ ] button if your Wi-Fi network
is available for connection.
36 ENGLISH
• Once "YES" is confirmed, the Setup wizard
starts; (see "Continue for the Setup wizard" in
the following page)
• Selecting »NO« will skip the Setup wizard. Select
this option if Wi-Fi network is not available for
connection. Furthermore, A pop-up menu will
ask "Run wizard again at next start up". Choose
the desired option (YES or NO) and the device
will return to the Main Menu.
• You can recall this Setup Wizard from the <
System menu > any time you want by pressing
the »MENU« on remote control to edit or create
a new WI-FI connection.
• (e.g. Current mode menu > System Settings >
option "Setup wizard")
Network settings
Note:
• By default, the Soundbar will shut down its Wi-Fi
connection when it is in standby. This minimizes
power consumption but it does mean that you
will need to switch the radio on manually in order
to use any other remote control software (like
UNDOK app). if you want to remotely control the
Soundbar even when it has been switched into
standby.