Pelonis PFC50A4AWGUK Manual Del Propietário página 10

INSTRUCTIONS
Note: Both machine body operation "
are buttons of wind type;
Both machine body operation "
are buttons of cool wind;
CLEANING AND MAINTENANCE
Notice
Disconnect the power before cleaning the product. Clean after the product is shut down for two
minutes.
Prevent from using any abrasive tools and solvents that may damage the surface to clean up the
product. Detergent can be used in the cleaning, and then wiped clean with dried cloth in time.
Prevent from washing the machine body with water directly, and wash disassemble parts (wet
curtain parts) with a soft brush and then install them after they are cleaned and dried.
It is not allowed to take the product apart for any modification. It is recommended that this product
should be checked and cleaned regularly in order to extend its service life.
CLEANING AND MAINTENANCE
Guidance on the disassembly and installation of wet curtain parts
1 Remove the wet curtain support.
3 Take out the wet curtain for cleaning.
" and remote control "
" and remote control "
2 Rotate the bottom buckle at first, and
then remove the wet curtain.
4 Install wet curtain support.
9
"
"