Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Menu Operation
Menu System
Set up the following functions;
Display
Setting
Setting overview
"SECURITY
Refer to
Sets/Resets security code
SET"/
page 12
"SECURITY
CLR"
"CLOCK
Refer to
Sets the clock.
ADJUST"
page 13
"DISPLAY"
ON*/OFF
Turns off the display when no
operation is performed.
"DIMMER"
AUTO*/OFF Dims the display in conjunction
1,2,3
*
with the light switch of the
vehicle.
4
"DIMMER"*
ON/OFF*
Adjusts the brightness of
the display according to the
surrounding illumination.
"DOT LINE"
ON*/OFF
Specifies whether to display the
red dotted line on the display.
3,4
"SWPRE"*
REAR*/
Sets the preout output.
SUB-W
1,2
"AMP"*
ON*/OFF
Turns on/off the built-in amplifier.
"AMS
Refer to
Controls the connected LX
1
CONTROL"*
page 13
amplifier.
"ZONE2"*
1,2,3
REAR*/
Specifies the destination of AUX
FRONT
input sound when the Dual Zone
function is turned on.
"SUPREME" ON*/OFF
Turns ON/OFF the Supreme
function.
"CRSC"
OFF/ON*
Switches to Monaural to decrease
noise when reception is poor.
"NAME SET" Refer to
Sets the display when switched
page 14
to AUX source.
"SCROLL"
AUTO*/
Specifies whether the text is
MANUAL
scrolled automatically.
"RECEIVE
Refer to
Sets the receive mode of HR radio.
MODE"
page 14
"ESN"
—
Displays the Electronic Serial
Number of satellite radio.
"AUX"
OFF/ON1*/
Sets whether to display AUX
ON2
during source selection.
"CD READ"
1*/2
Sets the CD read mode.
"DEMO
Refer to
Specifies whether to enable
MODE"
page 14
demonstration.
*Factory setting
*1 Function of KDC-X492.
*2 Function of KDC-MP438U.
*3 Function of KDC-MP408U.
*4 Function of KDC-MP338.
Displayed item is depending on currently selected
source. The mark in Source column shows the
12
|
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
source to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB
Source
(excluding iPod).
: Can be set during FM reception.
: Can be set during Satellite radio source.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
— : Can be set during all sources.
1
Enter Menu mode
—
Press the [M.JOG] button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Push the Control knob towards up or down.
—
3
Set the menu item
Push the Control knob towards right or left.
4
Exit Menu mode
Press the [M.JOG] button.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
—
• "ZONE2" is displayed when "2ZONE" in <Audio Setup>
(page 7) is set to "ON.
• Refer to the <Appendix> (page 16) for the details of the
menu items.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Activating Security Code
—
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1
Select Security Code item during Menu mode
Select the "SECURITY SET" display.
For how to select menu items, refer to <Menu
System>(page 12).
—
2
Enter Security Code mode
Press the Control knob for at least 1 second.
When "ENTER" is displayed, "CODE" is also displayed.
3
Select the digits to enter
Push the Control knob towards right or left.
4
Select the Security Code numbers
Push the Control knob towards up or down.
Publicidad
Capítulos
Tabla de contenido
