Publicidad
MSRP1400
MSRP1400 by Mac Allister
MSRP1400 by Mac Allister
Grass catcher
Grass catcher
Recogedor de hierba
>
Conecte las dos piezas del bastidor metálico del recogedor de hierba (Fig.8).
> Connect the two parts of the metal grass catcher frame (Fig.8).
> Connect the two parts of the metal grass catcher frame (Fig.8).
>
Inserte el bastidor en el recogedor de hierba y una la abrazadera de caucho al
> Insert the frame into the grass catcher and fasten the rubber
> Insert the frame into the grass catcher and fasten the rubber
clamp to the metal frame (e.g. Fig.9a, 9b).
bastidor de metal (Fig. 9a, 9b).
clamp to the metal frame (e.g. Fig.9a, 9b).
> Open the back cover of the housing, and place the grass catcher
> Open the back cover of the housing, and place the grass catcher
>
Abra la cubierta posterior de la carcasa y coloque la barra del recogedor de hierba
hanger bar over the hinges (Fig.10).
hanger bar over the hinges (Fig.10).
sobre las bisagras (Fig.10).
WARNING: The motor must be switched off and the
WARNING: The motor must be switched off and the
¡ATENCIÓN! El motor debe estar apagado y las cuchillas deben estar paradas
blades must have stopped rotating before you attach
blades must have stopped rotating before you attach
antes de colocar el recogedor de hierba.
the grass catcher.
the grass catcher.
MSRP1400-3663602627210-MacAllister-ES-V01.indd 17
Fig. 8
Fig. 8
Fig. 9a
Fig. 9a
Antes de empezar
Before you start
Before you start
Fig. 9b
Fig. 9b
Fig. 10
Fig. 10
EN
EN
16
16
17
20/4/2018 12:01
Publicidad
